| Author |
Message |
Aesoteric

Joined: Nov 29, 2005 Posts: 11 Location: Bristol
G2 patch files: 2
|
Posted: Thu Sep 25, 2008 12:33 pm Post subject:
G2 Engine with Behringer BCR2000 |
 |
|
Hey all,
I have a question for anyone who is running a BCR2000 with a G2. I know the Behringer can recieve MIDI feedback from its host, ie. moving a linked pot in Pro Tools will update the hardware's position, but can this be achieved with the G2? Can, in essence, the BCR replace the interface on the keyboard version of the G2? So if I set up multiple pages on the BCR and then switch between them, can the G2 send out position information to update the BCR to the correct positions?
Thanks,
TJ |
|
|
Back to top
|
|
 |
Antimon

Joined: Jan 18, 2005 Posts: 4145 Location: Sweden
Audio files: 373
G2 patch files: 100
|
Posted: Thu Sep 25, 2008 12:40 pm Post subject:
|
 |
|
Yes parameter feedback works perfectly from the G2 to the BCR and the BCF. I've used it a lot.
Having said that, the pots and LCDs on the G2 keyboard are a bit more advanced, being able to tweak all parameters in a patch (not just the once that have been assigned to knobs). It's also a bit of chore to set up all of the MIDI parameters in the BCR, though the learn function in both the BCR and the G2 helps.
/Stefan _________________ Antimon's Window
@soundcloud @Flattr home - you can't explain music |
|
|
Back to top
|
|
 |
Aesoteric

Joined: Nov 29, 2005 Posts: 11 Location: Bristol
G2 patch files: 2
|
Posted: Thu Sep 25, 2008 1:02 pm Post subject:
|
 |
|
Hi Stefan,
Thanks for getting back to me. Is it as simple as assigning the controls on the G2 to pots on the BCR? Or do you need to set up midi outs on each of the controls of the G2 to achieve feedback?
I'm trying to imagine a way of setting up the BCR to interface with the G2 Parameter pages, so that assigning a function in a patch is as simple as it would be with the G2 Keyboard. Is that possible?
Cheers,
TJ |
|
|
Back to top
|
|
 |
Antimon

Joined: Jan 18, 2005 Posts: 4145 Location: Sweden
Audio files: 373
G2 patch files: 100
|
Posted: Fri Sep 26, 2008 12:58 am Post subject:
|
 |
|
Unfortunately the knobs in the parameter pages can't be assigned MIDI parameters. This is a pity, I think, but it's the way it is - like you say this would go a long way towards replacing the G2 key interface. You assign MIDI controls to individual knobs in patches.
The way I do it is that I have presets on the BCR with e.g. all knobs set to MIDI channel 1 and CCs 70-101 (or some other interval - you need to check on the G2 because some CCs don't appear in the MIDI assign menu). Having set that up, I can assign MIDIs to a G2 patch by tweaking a knob on the BCR and right-clicking on the knob I want to assign in the G2 editor. In the MIDI assign menu the control I just tweaked will appear, so I don't need to scroll through that big menu with all 100+ control messages.
I haven't found a smoother way, but it's still pretty useful.
/Stefan _________________ Antimon's Window
@soundcloud @Flattr home - you can't explain music |
|
|
Back to top
|
|
 |
|