electro-music.org   Dedicated to experimental electro-acoustic
and electronic music
 
 Front Page  |  Radio  |  Forum  |  Media  |  Playlists  |  Wiki
Forum with support of Syndicator RSS
 FAQFAQ   CalendarCalendar   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   LinksLinks
 RegisterRegister   ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in  Chat RoomChat Room 

Brief maintenance shutdown at 10:00 PM EST - 0400 UTC

Coming up on Radio 1 at
Twyndyllyngs live on Chez Mosc
 
 Forum index » DIY Hardware and Software » Thomas Henry designs
SN-Voice calibration
Post new topic   Reply to topic Moderators: Scott Stites
Page 1 of 1 [2 Posts]
View unread posts
View new posts in the last week
Mark the topic unread :: View previous topic :: View next topic
Author Message
synchroton



Joined: Mar 02, 2010
Posts: 20
Location: Milwaukee, WI USA

PostPosted: Tue Mar 23, 2010 11:33 am    Post subject: SN-Voice calibration Reply with quote  Mark this post and the followings unread

So i just spent a few hours trying to calibrate my SN-Voice. It appears that the frequencies are diverging rather than converging as i'm tuning it. I just end up running out of adjustment.

I initially started at GND = 60Hz and tried to get 1v = 120Hz. No luck. Then I tried 1v = 60Hz and 2v = 120Hz. I'm using a decade resistor divider to make my reference voltage. Using a voltmeter as well to ensure that my voltage is correct. Since it's not a stiff voltage source I'm tweaking the resistance until I get the desired voltage shown on my meter (measured from the V/oct input)

I've also tried this with the HF trim set at either end of the extreme and I can't seem to make it work.

I initially substituted the 100ohm trimpot for a 200 ohm -- I can't see why this would cause me to be unable to tune but that's the only thing I can imagine may be problematic. Or I need to increase/decrease R3? Any thoughts?
Back to top
View user's profile Send private message
synchroton



Joined: Mar 02, 2010
Posts: 20
Location: Milwaukee, WI USA

PostPosted: Wed Mar 24, 2010 10:14 am    Post subject: Reply with quote  Mark this post and the followings unread

Oh, and for what it's worth, I'm running it at +/- 15v.

Please help! so excited to have proper tuning!
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic Moderators: Scott Stites
Page 1 of 1 [2 Posts]
View unread posts
View new posts in the last week
Mark the topic unread :: View previous topic :: View next topic
 Forum index » DIY Hardware and Software » Thomas Henry designs
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
Log in
Username:     Password:      Log me on automatically each visit    


Forum with support of Syndicator RSS
Powered by phpBB © 2001, 2005 phpBB Group
Copyright © 2003 through 2026 by electro-music.org