Joined: Oct 13, 2007 Posts: 6221 Location: near Austin, Tx, USA
Audio files: 270
Posted: Sun May 30, 2010 6:51 pm Post subject:
Shane, what a perfect beginner's project for you! It's simple, it's experimental, and it works with all your percussion stuff. I didn't even know you could bow a gong, I thought they were mainly for bashing. So you'll pick up some basic solder skills and have fun playing with the contact mics - what next?
Les _________________ "Let's make noise for peace." - Kijjaz
Joined: Oct 13, 2007 Posts: 6221 Location: near Austin, Tx, USA
Audio files: 270
Posted: Sun May 30, 2010 9:14 pm Post subject:
to practice soldering, you might want to try your hand at wire art. Just get some wire and strip it and bend/solder some creation. Costs essentially nothing and is good practice...
Les _________________ "Let's make noise for peace." - Kijjaz
Les: not a bad idea.. I may try that. Although... Im afraid I need to buy another soldering iron. I bought one that runs on batteries... and its chewing through 'em quick. _________________ ElectroCasa
I love bowls, bells and gongs, etc. LOVE Tibetan bowls..
Wondering how are you're "attacking" the gong?
Are you bowing the edge?
Your microphone project takes me back to Rebecca Mercuri's seminar at Pocono Skies,which opened my eyes and ears in a big way...
-this makes me wanna build something
Dan
Yes bowing the edge of the gong. If you have multiple edges in a gong you can get numerous tones. The edges of lots of things are bowable... I also have some scrap metal, cymbals, and old cymbals that all have their own peculiar sounds.
Some Tibetean bowls would be nice _________________ ElectroCasa
Joined: Jun 07, 2006 Posts: 167 Location: Rockland County, NY
Audio files: 3
Posted: Mon May 31, 2010 6:33 pm Post subject:
You can also stop the gong with your thumb or finger at different locations while bowing to, with some practice, extract specific pitches. I did a multitrack tape piece in 1975 called "Bronze Cloud Disk" that used just that technique. You can hear a short excerpt of it, from my Experimental Intermedia release called "The Thousand Shades of Blue", here:
There's another piece from the same time on that release, called "Two Mirrors Face One Another", that uses bowed Japanese temple bowls as the sound source. Here's an excerpt from that:
Have you tried using two pickups on different parts of the cymbals for stereo?
I thought about that...but I haven't tried it yet. Yesterday I used the contact in conjunction with a condensor mic to get more of the high freqs. That worked out quite well.
Ill be doing some of that in Atmosphera tomorrow evening. _________________ ElectroCasa
Joined: Jun 06, 2006 Posts: 74 Location: manipulate.net
Posted: Tue Jun 01, 2010 12:08 pm Post subject:
Try bowing Vibes and a Marimba.
Hell...
Anything you can get an edge on that will vibrate.
I really love the sound of bowing metal.
I have a rig setup for just this noiz.
I radar dish to cymbals so i don't have to touch them when bowing.
I haven't seen anyone else do that and I don't know why they wouldn't have to begin with.
(I will need to ask my professor about that one.)
I attached a couple of pics.
One is my general rig of metallics.
The other is a noiz rig for a guest appearance with another project.
SPIKE_the_Percussionist-metallic-rig.JPG
Description:
mettallics rig
Filesize:
2.4 MB
Viewed:
1248 Time(s)
This image has been reduced to fit the page. Click on it to enlarge.
SPIKE_the_Percussionist-noiz-guest.JPG
Description:
noiz guest rig
Filesize:
1.94 MB
Viewed:
1232 Time(s)
This image has been reduced to fit the page. Click on it to enlarge.
Try bowing Vibes and a Marimba.
Hell...
Anything you can get an edge on that will vibrate.
I really love the sound of bowing metal.
Indeed Spike... I have a collection of scrap metals and found sounds in addition to gongs and cymbals that Ive been bowing... as well as a vibraphone. I will be bowing vibes and metals in combination with synths on my show, Atmosphera here at radio.electro-music.com tomorrow evening at 6pm CST|00:00 GMT. Drop the chat and/or listen if you are around!
Cool pics ... thanks for sharing them. This thread has sparked some interesting conversation. _________________ ElectroCasa
Joined: Jun 06, 2006 Posts: 74 Location: manipulate.net
Posted: Tue Jun 01, 2010 3:04 pm Post subject:
Quote:
Indeed Spike... I have a collection of scrap metals and found sounds in addition to gongs and cymbals that Ive been bowing... as well as a vibraphone. I will be bowing vibes and metals in combination with synths on my show, Atmosphera here at [b][i][color=#255293][b][i][color=#255293]radio.electro-music.com[/color][/i][/b][/color][/i][/b] tomorrow evening at 6pm CST|00:00 GMT. Drop the chat and/or listen if you are around!
Cool pics ... thanks for sharing them. This thread has sparked some interesting conversation.
NEAT!
I have a rehearsal at 6:30 so I will try to catch some of your noiz before then! _________________
Joined: Jun 06, 2006 Posts: 74 Location: manipulate.net
Posted: Tue Jun 01, 2010 9:04 pm Post subject:
cbm wrote:
Superballs are also great to excite gongs.
I have 2 pairs of the Mike Baltar Superball mallets and they work REALLY great. I also found another company who makes them with sets of 3 on each mallet which is nice.
My friend Z'ev makes his own with a certain type of hacksaw blade.
The trick is that the thing that the ball is attached to has enough give to vibrate and allow the ball to bounce. _________________
NEAT!
Your vibes look WAAAAYY better than my mine.
I have the world's most P.A.F. set of vibes.
I would really like some new ones but i keep gravitating toward a Mallet Kat.
ack!
Thanks Spike... I have Ross 715S vibes which I like a lot. I also have a malletkat as well... although it needs to be sent off for repairs. _________________ ElectroCasa
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum